Recently searched
- ${item}
Hot searches
-
${item.word}
7/21
${data.index + 1}/${data.total}
Description
700 x 32C TPU Ultralight ROAD Bike Tube
Lightweight - Small - Anti-ageing
The advantage of TPU material
Endure heat - Cold hardy - High elasticity - Tear resistant - 38g Ultralight - Long lasting - Recyclable - Easy to carry
Parameters
Name : 700C x 32C TPU Ultralight Road inner tube
Brand : CYCLAMI
Materials : TPU & Copper Alloy
Weight : ≈ 38g (±3g)
Color : Pale Green
Valve : FV 60mm
Apply to : Road Bike 700 X 18 / 23 / 25 / 28 / 30 / 32C
· For rim brake and disc brake wheelsets
· For road bikes with 18~32mm width Tyre
· Reduced rolling resistance
Lose weight on your tires
Reduced spinning mass where there are more (wheelsets), more responsive acceleration and resulting improved handling and climbing speed.
*Opt for ultralight inner tubes to save weight or space.
Good! Now I put it in the bag.
Improved puncture resistance, lighter weight and more compact when folded.
TPU Puncture Resistant Material
The new TPU material has excellent puncture resistance. It is made in one piece, with no long seams around the circumference of the inner tube,There is only a ring of joints around the valve,Reduces the possibility of air leakage.
Long-Lasting And Stable Tyre Pressure
Resistant to high and low temperatures, stable tyre pressure ensures your safety when going downhill.
Reinforced Nozzle Interface Process
Three times reinforced seal for the easily damaged and irreparable nozzle connection, which has been tested and will not leak even if pulled hard for more than 2000 times.
Stretchable up to 8 Times The Length
After our actual test, the inner tube can be stretched up to 8 times its original length before it breaks, while similar products are stretched only 5 times before breaking.
Caution:
This inner tube cannot be inflated a lot when it is not installed in the outer tire, otherwise it will cause irreversible damage! Vacancy pumping more than 8PSI will result in unrepairable swelling!
*Please inflate slightly before installation to check for air leaks!
When installing, inflate 0.5bar(5PSI), submerge the inner tube in water and press to see if there is any air leakage
(If you find air leakage you can contact us for a new inner tube)
Inner Tube Assembly Steps
1. Starting from the valve part, put the tube into the tire orderly in one direction as illustrated.
2. Then, do it orderly in the other direction as illustrated until the whole tube fits in.
3. Starting from the opposite side of the valve (as illustrated),fit in the tire orderly in bothdirections simultaneously.
4. If no press and pull to adjust the valve, it may result in deformationor breakage while pumping, due to the valve being jammed inside.
* After the tire is fitted, press the valve inward.
* Next, pull the valve outward, to prevent the valve part from being jammed inside.
5. At 0.5 psi, massage and adjust the tube to fit into the rim.
* Its important to massage the tube at 0.5 psi.
This step will prevent the tube from not fully expanded.
Okay, I'm ready to buy!
How do I pick the right size?
Confirm your tyre size
Firstly, please check the specification on the side of your tyre.
As you can see in the picture below, the outer tube is marked 700X28, so you can choose a 700X18/32 inner tube.
(Because of the elasticity of the inner tube, it is compatible with the 700 x18-32C range)
Choose valve iength
The choice of air nozzle can be decided according to the hole on your rim, the length of the valve according to the thickness of the rim to choose, in order to facilitate the pumping, the general choice of length greater than the rim 2cm air nozzle.
Notes on use
1.Inner tube inflation should meet the standard, such as air pressure is not enough do not ride, or cause stress concentration, inner tube deformation.
2.The vehicle should be parked during the avoidance of too long exposure to the sun or moisture.
3.Do not contact the inner tube with oil or corrosive tire fluid.
4.tires found puncture or air leakage timely repair before use.